Restaurant and commercial kitchen floors require a surface that can tolerate repeated washing, food spills, grease, impact, moisture, and constant employee movement while maintaining safe footing. Richmond Hill Epoxy Flooring has 20 years of specialized experience installing commercial kitchen epoxy systems using high-build 100% solids epoxy, quartz aggregates, decorative flakes where appropriate, chemical-resistant formulations, and compatible protective topcoats. Our licensed technicians provide flooring solutions for restaurant kitchens, food preparation areas, serving spaces, dishwashing zones, beverage areas, commercial catering facilities, and other food-service environments throughout Richmond Hill.
Restaurant and kitchen flooring services include seamless epoxy installation, quartz broadcast systems, anti-slip flooring, coved floor transitions, resurfacing, recoating, and localized repairs. Commercial kitchen systems can typically be specified at approximately 60–100+ mils of total dry film thickness, with aggregate-rich surfaces used where increased traction is required in wet or grease-prone areas. Quartz aggregates provide a textured finish that can improve slip resistance, while chemical-resistant resin formulations help protect the concrete from cleaning agents, oils, food-related substances, and repeated wash-down procedures.
Before installation, technicians inspect the concrete for cracks, spalling, grease contamination, moisture conditions, existing coatings, drainage concerns, and surface irregularities that could interfere with adhesion or cleaning performance. Mechanical grinding or shot blasting removes contaminants and establishes the appropriate profile, followed by compatible crack repair, primer application, epoxy installation, aggregate broadcasting, and protective sealing according to the selected system. Floor-to-wall transitions can also be detailed with compatible cove systems where specified, creating easier-to-clean junctions that reduce exposed edges and difficult-to-maintain corners.
Restaurant and kitchen repairs address worn surfaces, chipped coatings, localized delamination, cracks, staining, and areas affected by equipment movement or repeated wash-down exposure. Technicians identify the source of the failure, remove unsound material, prepare the affected concrete, and install compatible repair layers so localized deterioration can be corrected without automatically replacing the entire flooring system.
Most restaurant and commercial kitchen epoxy projects require approximately 7–14 business days, depending on kitchen size, substrate preparation, repairs, cove detailing, coating thickness, aggregate requirements, and curing conditions. Once fully cured, the seamless surface provides an easier-to-clean floor with resistance to moisture, abrasion, stains, routine cleaning chemicals, and heavy daily foot traffic, supporting demanding food-service operations.
Get a FREE Quote

A couple who cook and bake for a weekend market stall were tired of water seeping between the vinyl planks in their 320 sq ft galley kitchen near Elgin Mills Road. The crew pulled up the old flooring, ground the concrete subfloor and filled the seams, then poured a light grey self-levelling epoxy with a coved edge along the cabinet toe kicks. A satin urethane topcoat with fine anti-slip grit finished the job. Spills now wipe up in seconds, and nothing sneaks under the floor anymore.
Turnaround time: 3 days
Final price: $4,700 CAD

Restaurant kitchen epoxy floor coating provides a seamless, nonporous resin surface for commercial kitchen areas exposed to food spills, grease, oils, moisture, cleaning chemicals, and frequent foot traffic. We use planetary diamond grinders, industrial HEPA dust extractors, concrete moisture meters, variable-speed resin mixers, gauge rakes, notched squeegees, and industrial rollers to prepare the concrete and apply the specified coating system. Mechanical grinding removes laitance, grease contamination, deteriorated coatings, and weak surface material before epoxy primer is applied to establish a mechanically bonded foundation.
The flooring assembly can incorporate a high-solids epoxy primer, high-build epoxy body coat, graded aggregate, and polyurethane or polyaspartic topcoat according to the kitchen's exposure conditions. Mineral aggregate can be incorporated into the resin to establish a controlled textured profile, while the protective topcoat seals the system against grease, staining, moisture, and selected cleaning chemicals. Resin and hardener are measured according to the manufacturer's specified ratio and mechanically blended at controlled speed before application within the material's working time.
Floor drains, equipment bases, transitions, wall edges, and other kitchen details are addressed during preparation to maintain continuous coating coverage around areas subject to moisture and food residue. Concrete moisture and substrate conditions are verified before installation because excessive moisture beneath an epoxy system can interfere with adhesion and curing. The completed floor provides a seamless, cleanable surface designed for commercial kitchen traffic, repeated washing, grease exposure, and routine sanitation procedures.

Restaurant dining area epoxy flooring creates a continuous resin surface that combines abrasion resistance with a cleanable finish for areas exposed to chairs, tables, pedestrian traffic, food debris, and routine floor maintenance. Diamond-grinding equipment, HEPA dust extraction, industrial vacuums, calibrated mixing drills, squeegees, rollers, and edge-detailing tools are used to prepare the concrete and distribute the coating consistently. Existing surface contaminants and incompatible finishes are removed before the epoxy layers are installed over the mechanically profiled substrate.
Decorative vinyl flakes, quartz aggregate, or pigmented epoxy can be incorporated to establish the specified appearance while maintaining a sealed resin surface. Flake systems use controlled broadcast coverage, while quartz systems incorporate graded mineral particles into wet epoxy to create additional texture and wear resistance. A polyurethane or polyaspartic clear coat can provide the final wearing layer with improved resistance to abrasion, staining, moisture, and routine cleaning chemicals.
The selected coating thickness and surface profile are matched to the expected pedestrian traffic and maintenance procedures within the dining area. Transitions around thresholds, floor edges, columns, and fixed fixtures are carefully coated to reduce exposed concrete areas where food debris or moisture could accumulate. The finished epoxy flooring provides a seamless surface that supports frequent cleaning while maintaining consistent coverage under repeated restaurant foot traffic.

Restaurant anti-slip epoxy flooring uses mineral aggregate embedded within the resin coating to increase traction in areas exposed to water, oils, grease, food residues, and cleaning solutions. Preparation requires diamond grinders, HEPA-filtered dust extraction, moisture meters, mechanical resin mixers, notched squeegees, rollers, and controlled aggregate broadcast equipment. Concrete is mechanically profiled and cleaned before the epoxy base coat receives the specified anti-slip aggregate.
Quartz, aluminum oxide, silica-based particles, or other compatible mineral aggregates can be selected according to the required texture and operating conditions. Aggregate size and broadcast density determine the resulting surface profile, while the epoxy resin secures the particles within the coating and provides continuous coverage around the textured material. A compatible clear seal coat can encapsulate the aggregate and provide additional resistance to abrasion, grease, staining, moisture, and selected cleaning chemicals.
Kitchen preparation areas, dishwashing zones, service corridors, beverage stations, and other wet sections can receive different aggregate configurations based on their exposure conditions. The finished texture is evaluated for consistent particle distribution, resin coverage, and loose aggregate before the final coating reaches full cure. This flooring configuration provides controlled traction while retaining the seamless, nonporous, and cleanable characteristics required for commercial food-service environments.

Restaurant decorative flake epoxy flooring combines epoxy resin with colored vinyl flakes to produce a customized floor finish suitable for dining areas, service corridors, food preparation zones, and other restaurant spaces. Installation utilizes diamond-grinding equipment, HEPA dust extraction, industrial vacuums, calibrated resin mixers, notched squeegees, rollers, flake broadcast containers, and spike rollers for controlled material placement. The epoxy base coat is applied over prepared concrete before the selected flake blend is broadcast into the wet resin.
Vinyl flakes are available in different sizes, colors, and blends, allowing the floor specification to incorporate a defined decorative pattern and surface texture. Partial broadcast systems provide controlled color variation across the resin surface, while full-broadcast systems produce denser flake coverage that helps conceal minor visual inconsistencies within the coating. After the resin cures, excess flakes are removed and a clear polyurethane or polyaspartic topcoat is applied to encapsulate the decorative material.
The clear topcoat creates the final sealed surface and improves resistance to food staining, grease, moisture, abrasion, and repeated cleaning. Slip-resistant aggregate can be incorporated into the clear coat when additional traction is required for areas exposed to water or food-service liquids. Proper flake distribution, resin thickness, topcoat coverage, and surface preparation produce a durable restaurant epoxy floor with a consistent decorative finish and controlled maintenance characteristics.
We begin restaurant and commercial kitchen epoxy flooring projects in Richmond Hill, ON by evaluating the existing floor according to food-service traffic, grease exposure, water usage, cleaning procedures, temperature changes, and drainage requirements. Particular attention is given to cooking lines, dishwashing stations, preparation areas, walk-in cooler approaches, service corridors, and locations surrounding floor drains. Digital moisture meters, laser levels, inspection lights, measuring tools, and drainage checks are used to identify conditions that could affect coating performance or sanitation.
Floor slope and drainage are assessed because standing water can create operational and maintenance problems in commercial kitchens. Low areas, damaged concrete, deteriorated joints, and uneven transitions are documented before the coating specification is established. Resin systems are selected according to exposure to grease, food residues, detergents, hot-water cleaning, and frequent foot traffic.
The flooring configuration may incorporate high-solids epoxy, quartz-filled epoxy, or urethane cement depending on the facility's thermal and chemical exposure. Cove base detailing can also be incorporated at wall-to-floor transitions to reduce difficult-to-clean corners and create a more continuous sanitary surface. This assessment establishes an easy-clean epoxy flooring system suited to the operating conditions of restaurants and commercial kitchens in Richmond Hill, ON.
Our preparation process gives priority to grease and food-service contamination because these substances can prevent resin materials from bonding properly to concrete. Commercial alkaline degreasers, rotary floor scrubbers, stiff-bristle brushes, wet-dry extraction equipment, and industrial vacuums are used to break down and remove contaminants from the slab. Persistent grease deposits are treated through additional cleaning and mechanical abrasion rather than being sealed beneath the coating.
Diamond grinding and controlled mechanical abrasion remove weak concrete, surface laitance, existing coatings, and remaining contamination while producing the surface profile required by the selected resin system. Cracks and damaged areas are repaired with compatible epoxy fillers, polyurea compounds, or cementitious repair materials depending on the location and movement characteristics. Floor drains and penetrations are carefully prepared so coating materials terminate cleanly around these functional components.
After cleaning and profiling, the slab is checked for residual contamination, surface texture, dryness, and moisture conditions. Moisture testing is particularly important in kitchen areas that receive frequent washing because excessive vapor transmission can compromise coating adhesion. The prepared surface is vacuumed thoroughly before coating application to provide a clean substrate for the sanitary flooring system.
We apply the selected resin system using low-speed mechanical mixers, stainless-steel or notched squeegees, gauge rakes, rollers, and detail brushes. Two-component materials are measured and mixed according to the manufacturer's specified ratio, while working batches are controlled to remain within the product's usable pot life. High-build epoxy or urethane cement can be installed at specified thicknesses to provide greater resistance to grease, detergents, impact, and repeated cleaning.
Quartz aggregate can be incorporated into the resin where additional texture and mechanical durability are required. Broadcast aggregate is embedded into the wet resin and followed by the specified binder or seal coat to encapsulate the surface and create a dense, cleanable finish. In areas requiring enhanced thermal or chemical resistance, urethane cement may be selected because it is designed for demanding environments involving hot water, aggressive cleaning agents, and temperature fluctuations.
A resinous cove base is installed at the wall-to-floor transition when specified to create a continuous sealed edge. Cove material is formed using radius cove tools and compatible resin mortar, with the transition shaped to minimize sharp corners where grease, water, and food particles could accumulate. This detailing supports easier cleaning while protecting the perimeter of the restaurant epoxy flooring system.
Our final inspection focuses on surface continuity, drainage, cove transitions, coating coverage, texture, and areas surrounding equipment and floor penetrations. The finished floor is examined for pinholes, bubbles, exposed concrete, uneven aggregate, incomplete cove coverage, and other defects that could interfere with cleaning or moisture resistance. Any identified deficiencies are corrected using compatible resin materials before the curing period is completed.
The coating system is allowed to cure under conditions appropriate for the selected product and the facility's operating environment. Temperature, humidity, substrate conditions, ventilation, film thickness, and recoat intervals are monitored because these factors influence resin curing and final performance. Kitchen operations remain restricted until the flooring reaches the manufacturer's specified level for foot traffic, equipment movement, washing, and chemical exposure.
Once cured, the floor is cleaned and inspected for a consistent, seamless, and serviceable finish. The completed system can provide resistance to grease, food-related staining, detergents, abrasion, moisture, and frequent cleaning while supporting easier routine floor maintenance. This process provides restaurant and kitchen epoxy flooring in Richmond Hill, ON configured for demanding food-service environments where sanitation and durability are essential.
Sanitary Surfaces for Food Preparation Environments
Restaurant and kitchen epoxy flooring provides a seamless, low-porosity surface designed for food preparation areas, cooking zones, dishwashing spaces, service corridors, and commercial dining facilities. We use resin-based flooring systems selected for frequent cleaning, moisture exposure, grease, food residue, and routine foot traffic. Depending on the operating conditions, the system can include an epoxy primer, high-build body coat, quartz or mineral aggregate, and a chemical-resistant polyurethane or polyaspartic topcoat.
Concrete preparation is particularly important in commercial kitchens because grease, oils, detergents, and moisture can interfere with coating adhesion. Mechanical grinding or shot blasting removes surface contamination and establishes the required concrete profile, while heavily contaminated sections may require additional cleaning or localized concrete removal. Cracks, spalls, damaged areas, and floor penetrations are repaired and detailed before coating materials are introduced.
The completed system creates a continuous finished surface with fewer exposed pores where food residue, grease, and moisture can penetrate. Seamless coating construction also supports routine sweeping, mopping, and compatible commercial cleaning procedures. The final specification is selected according to the kitchen's drainage conditions, cleaning frequency, traffic level, temperature exposure, and chemical requirements.
Our commercial kitchen flooring systems can incorporate quartz, aluminum oxide, or other compatible aggregate into the epoxy layer to establish controlled surface texture. Aggregate size and broadcast density are selected according to the required traction level and the facility's cleaning procedures. The protective topcoat encapsulates the aggregate and provides a durable surface while maintaining the specified texture.
Wet areas around sinks, dishwashing stations, food preparation zones, and floor drains can require greater attention to traction and drainage. The coating is applied without obstructing existing drain openings or changing designed drainage paths, while transitions and floor penetrations are detailed to minimize exposed gaps. Areas subject to grease accumulation are evaluated carefully because cleaning procedures and contaminant exposure directly affect the appropriate coating specification.
A properly selected aggregate profile provides a balance between traction and cleanability. Excessively coarse surfaces can make routine cleaning more difficult, while insufficient texture may not provide the desired surface characteristics in wet operating areas. The aggregate specification is therefore established according to the kitchen's actual exposure conditions rather than using a uniform texture throughout every space.
We select epoxy and protective topcoat materials based on exposure to commercial detergents, degreasers, food-related contaminants, oils, and other chemicals used within the facility. Chemical resistance varies by resin chemistry, concentration, temperature, and exposure duration, so the flooring system must be matched to the products used during routine cleaning and food-service operations. Areas with higher chemical exposure may require a specialized protective topcoat or upgraded resin formulation.
Drains, coves, floor penetrations, thresholds, and wall transitions receive detailed preparation before the coating is applied. Where required, resinous coving can create a continuous transition between floor and wall surfaces, reducing open joints at perimeter areas exposed to water and cleaning procedures. Drain edges are coated carefully while maintaining drainage openings and preventing material buildup that could restrict water flow.
Curing is controlled before the kitchen resumes normal operations because premature exposure to water, chemicals, heat, or heavy traffic can affect coating performance. The completed floor is inspected for continuity, aggregate distribution, edge detailing, drainage access, and visible coating defects before release for service. This method produces an easy-clean commercial floor configured around the demanding conditions of Richmond Hill restaurant and kitchen environments.
Yes, epoxy flooring can be specified for dishwashing areas when the system is selected for continuous moisture, cleaning chemicals, and frequent foot traffic. A suitable aggregate profile can provide increased surface texture, while the resin and topcoat are selected according to the detergents and chemicals used in the area. Proper substrate preparation and drainage detailing are essential because standing water and contamination can affect coating performance.
Certain epoxy and polyurethane systems provide resistance to specific cleaning chemicals, but performance depends on the chemical formulation, concentration, temperature, and contact duration. The flooring system should be selected based on the actual detergents, degreasers, sanitizers, and other products used by the restaurant. Where exposure is aggressive, a chemical-resistant topcoat or specialized resin system may be required.
Yes, epoxy can be detailed around existing floor drains while preserving the designed drainage openings and water flow. Drain edges and surrounding concrete must be clean, stable, and properly prepared before coating installation. Careful application prevents excessive material buildup that could interfere with drainage or create an uneven transition.
Its seamless, low-porosity surface makes the finished floor easier to clean than untreated concrete and reduces areas where contaminants can penetrate the slab. The coating can also be configured with chemical-resistant materials and controlled aggregate texture for demanding kitchen conditions. The final system must still be maintained according to the coating manufacturer's cleaning and service requirements.
Yes, resinous coving can be incorporated where a continuous floor-to-wall transition is required. The cove is formed using compatible resin and aggregate materials and detailed into the wall perimeter before or during the flooring installation sequence. This configuration can reduce exposed floor-wall joints in areas subjected to frequent washing and commercial cleaning.
© 2026 All Rights Reserved | Richmond Hill Epoxy Flooring