Metallic epoxy flooring transforms prepared concrete into a highly customized architectural surface by suspending reflective pigments throughout a resin system to create depth, movement, and distinctive visual patterns. With 20 years of specialized experience, Richmond Hill Epoxy Flooring installs metallic epoxy systems using high-build epoxy resin, metallic pigment powders, compatible primers, and clear polyaspartic or epoxy topcoats for residential and commercial interiors. Our licensed technicians control substrate preparation, pigment dispersion, coating thickness, and finishing techniques for basements, garages, showrooms, retail spaces, offices, studios, and other Richmond Hill properties where appearance and surface performance must work together.
Metallic flooring services include solid metallic finishes, marbled effects, flowing patterns, layered pigment designs, custom color combinations, and protective clear-coat applications. A typical decorative system can be specified at approximately 20–40 mils of total dry film thickness, with additional build incorporated where the application requires greater wear resistance or surface correction. Metallic pigments are blended into the resin and manipulated during installation to create the selected pattern, while a compatible clear topcoat can improve resistance to abrasion, staining, moisture, and routine chemical exposure.
Installation begins with an evaluation of concrete condition, cracking, contamination, previous coatings, moisture transmission, and surface profile before the decorative layers are applied. Technicians use diamond grinding to remove weak material and establish mechanical adhesion, repair substrate defects, apply the compatible primer and epoxy base, then manipulate the metallic resin using controlled application techniques to achieve the specified visual effect. Temperature, humidity, substrate condition, working time, coating thickness, and curing intervals are monitored because variations during application can affect pigment movement, pattern development, adhesion, and surface uniformity.
Metallic epoxy repair work addresses scratches, chips, localized coating damage, surface defects, and areas affected by impact or chemical exposure. Technicians assess the existing system for compatibility, mechanically prepare the damaged section, correct the substrate where necessary, and apply compatible decorative and protective materials while considering the surrounding pattern and finish.
Most metallic epoxy flooring installations require approximately 5–10 business days, depending on floor size, substrate preparation, repair requirements, decorative complexity, number of coating layers, and curing conditions. Once fully cured, the completed system provides a seamless decorative surface with resistance to everyday abrasion, staining, moisture, and routine traffic while maintaining the customized appearance specified for the property.
Get a FREE Quote

The walkout lower level of this home near Lake Wilcox had a bare, dusty concrete floor that made the new media room feel unfinished. The crew ground the 420 sq ft slab, patched the low spots and rolled on a black base coat, then hand-worked silver, white and pewter metallic pigments into the resin to create flowing, marble-like veins. A clear high-gloss urethane topcoat protects the finish from chair legs and foot traffic. The room now looks like a custom lounge, and guests always ask what the floor is.
Turnaround time: 3 days
Final price: $5,400 CAD

Metallic epoxy floor coating installation creates a seamless resin surface with dimensional pigment movement, reflective depth, and a customized finish for prepared concrete floors. We use planetary diamond grinders, industrial HEPA dust extractors, moisture meters, variable-speed resin mixers, calibrated mixing containers, flat squeegees, 3/8-inch nap rollers, spike shoes, and metallic manipulation tools to control preparation and application. Diamond grinding removes laitance, contaminants, weak concrete, and incompatible coatings while establishing the mechanical profile required for the metallic epoxy system.
The coating assembly typically incorporates an epoxy primer, pigmented metallic epoxy body coat, and a compatible polyurethane or polyaspartic clear topcoat. Metallic pigments are dispersed into the epoxy resin at a controlled concentration and applied at a specified film thickness to maintain predictable pigment movement and resin coverage. Squeegee placement, roller movement, and specialized manipulation techniques are used while the material remains within its working time to create the required metallic pattern without compromising coating continuity.
Substrate moisture, concrete temperature, ambient humidity, and resin temperature are evaluated before installation because these conditions influence adhesion, flow characteristics, and curing. Concrete cracks, pinholes, spalls, and surface voids are corrected with compatible epoxy repair compounds before the metallic coating is applied. The finished surface provides a continuous decorative resin floor with resistance to abrasion, staining, moisture exposure, and routine cleaning.

Metallic epoxy flake blended flooring combines metallic pigment effects with decorative vinyl flakes to create layered visual depth and additional surface texture. Preparation uses diamond-grinding equipment, HEPA dust extraction, industrial vacuums, calibrated resin mixers, squeegees, rollers, flake broadcast containers, and spike rollers for controlled material distribution. The metallic epoxy layer is installed over mechanically profiled concrete before selected vinyl flakes are distributed into the wet resin according to the specified broadcast density.
Metallic pigment concentration controls the movement and reflective character of the resin, while flake size and color determine the secondary decorative pattern across the floor. Partial flake broadcasts can preserve areas of metallic resin visibility, whereas denser broadcasts provide greater decorative coverage and a more textured surface profile. After curing, loose flakes are removed and a clear polyurethane or polyaspartic topcoat is applied to encapsulate the decorative materials and establish the final wearing layer.
The clear topcoat protects the metallic and flake layers against pedestrian abrasion, staining, moisture, and routine cleaning chemicals. Slip-resistant aggregate can be incorporated into the topcoat where additional traction is required for entrances, service areas, or locations exposed to moisture. Controlled pigment distribution, flake density, resin thickness, and topcoat coverage produce a customized metallic epoxy floor with a consistent decorative composition and durable surface protection.

Metallic epoxy marble finish uses multiple metallic pigment colors and controlled resin manipulation to reproduce the visual movement, contrast, and depth associated with polished stone surfaces. Variable-speed mixers, calibrated resin containers, flat squeegees, rollers, spike shoes, and specialized patterning tools are used to blend and manipulate the metallic resin while maintaining the required coating thickness. The concrete substrate is diamond-ground and HEPA-vacuumed before the epoxy primer establishes the foundation for the decorative marble-effect layer.
Contrasting metallic pigments are positioned within the wet epoxy to create veining, tonal transitions, and irregular movement across the floor surface. Controlled squeegee strokes, roller techniques, and directional manipulation determine the shape and intensity of the visual patterns while maintaining continuous resin coverage. A clear polyurethane or polyaspartic coating is installed after the metallic layer cures to protect the decorative finish from abrasion, staining, chemical exposure, and routine floor maintenance.
The marble-effect composition is planned before resin placement so color transitions and major visual movements remain controlled across adjoining application sections. Work areas are coordinated according to epoxy pot life to reduce cold joints and abrupt changes in pigment flow between sections. The completed metallic epoxy marble floor provides a high-gloss decorative surface with seamless resin coverage and a protective top layer engineered for regular interior use.

Metallic epoxy high-gloss flooring combines reflective metallic pigments with a smooth resin surface to produce a continuous floor finish with enhanced visual depth and light reflection. Installation requires precision diamond grinding, HEPA dust extraction, moisture measurement equipment, variable-speed mixing drills, flat squeegees, high-quality rollers, spike shoes, and calibrated resin containers. The prepared concrete receives the specified epoxy primer before the metallic body coat is distributed at a controlled thickness to support smooth pigment movement and surface consistency.
The metallic epoxy formulation uses selected pigments suspended throughout the resin to create a reflective appearance without relying on separate surface tiles or decorative panels. Controlled resin placement minimizes excessive roller texture, while appropriate working temperatures and mixing procedures help maintain predictable flow and pigment suspension during application. A high-clarity polyurethane or polyaspartic topcoat can be installed to enhance surface protection while maintaining the selected gloss level and visual clarity.
The final sheen is determined by the resin system and protective topcoat specified for the project, with gloss levels selected according to the desired decorative appearance. Surface inspection focuses on pigment distribution, coating uniformity, trapped air, edge transitions, and visible imperfections before the protective layer reaches final cure. The completed high-gloss metallic epoxy floor provides a seamless reflective finish with resistance to abrasion, staining, moisture, and routine cleaning.
We begin metallic epoxy flooring projects in Richmond Hill, ON by assessing the room's dimensions, lighting, intended use, existing concrete condition, and preferred visual effect. Floor measurements, lighting observations, surface inspection equipment, and design samples are used to determine the appropriate metallic color combination, base-coat configuration, and protective finish. Metallic pigments can be selected in coordinated shades such as silver, graphite, charcoal, bronze, copper, or custom blends depending on the desired depth and movement.
The metallic pattern is planned according to the floor layout so visual movement remains balanced across large open areas and individual rooms. Epoxy resin, metallic mica pigments, and compatible additives are selected based on the manufacturer's formulation requirements to maintain proper suspension and curing characteristics. Samples or controlled test areas can be used to evaluate pigment movement, color interaction, gloss level, and lighting response before full installation.
The concrete substrate is also evaluated for cracks, contamination, moisture, previous coatings, and uneven sections that could affect the final appearance. Metallic finishes can highlight substrate irregularities, making proper preparation essential before the decorative resin is applied. This planning stage establishes a customized metallic epoxy flooring system suited to residential, commercial, garage, showroom, and specialty spaces throughout Richmond Hill, ON.
Our preparation process uses diamond grinding equipment with progressively selected tooling to remove laitance, weak concrete, contaminants, and incompatible coatings. HEPA-filtered dust extractors and industrial vacuums collect concrete particles, while hand grinders and detail scrapers are used around corners, edges, joints, and fixed obstacles. Cracks and surface defects are filled with compatible epoxy repair compounds or polyurea materials before the decorative coating begins.
The prepared concrete is inspected for consistent mechanical profile, cleanliness, and moisture conditions before primer application. Moisture meters and surface-profile gauges help confirm that the slab meets the requirements of the selected metallic epoxy system. Any remaining dust, oil residue, loose material, or unstable coating is removed before the floor proceeds to the resin stages.
A compatible epoxy primer is applied where required to improve substrate penetration and establish a consistent foundation for the decorative layer. Two-component primer materials are measured and mixed using low-speed mechanical mixers, then distributed with squeegees and solvent-resistant rollers at the specified coverage rate. This controlled preparation creates the uniform base required for a high-quality metallic finish in Richmond Hill, ON.
We install the metallic epoxy using a high-solids or 100% solids epoxy base combined with manufacturer-compatible mica or metallic pigments. Resin and hardener are mixed at the specified ratio, followed by controlled pigment dispersion using low-speed mixers to reduce excessive air entrainment and maintain an even color suspension. The pigmented resin is spread with squeegees and rollers before specialized techniques are used to manipulate the metallic pattern.
Metallic movement can be developed using rollers, brushes, notched tools, and controlled air movement to create clouding, veining, waves, or contrasting visual effects. Different pigment concentrations can be introduced across selected sections to produce depth without creating uncontrolled pooling or excessive coating thickness. Application timing is carefully coordinated with the epoxy's working period because pigment movement must occur while the material remains workable.
The completed decorative layer is allowed to cure before the protective clear coat is installed. A clear epoxy, polyurethane, or polyaspartic topcoat can be selected according to expected traffic, chemical exposure, ultraviolet exposure, and maintenance requirements. The final coating protects the metallic design from abrasion, staining, and routine wear while preserving the intended gloss and visual depth.
Our final inspection evaluates the metallic floor under different viewing angles and lighting conditions to check color distribution, pigment movement, gloss consistency, coating coverage, and visible surface defects. Pinholes, bubbles, uneven transitions, exposed substrate, or unwanted contamination are identified before the floor is released for use. Compatible resin materials are used for localized corrections when the finished surface requires additional detailing.
The protective topcoat is allowed to cure according to the manufacturer's specified temperature, humidity, ventilation, and recoat requirements. Foot traffic, furniture placement, vehicle loading, and cleaning activities are restricted until the coating reaches the appropriate service condition. This controlled curing period allows the resin system to develop its intended hardness, adhesion, stain resistance, and abrasion performance.
After curing, the floor is cleaned and reviewed for decorative consistency and functional performance. The completed metallic epoxy surface provides a seamless decorative finish that can combine high visual depth with resistance to everyday wear, stains, and routine cleaning. This process delivers customized metallic epoxy flooring in Richmond Hill, ON engineered around the property's design objectives and practical usage requirements.
Layered Pigment Effects and Controlled Surface Depth
Metallic epoxy flooring creates a customized resin surface by suspending reflective metallic pigments within a two-component epoxy coating system. We use high-build epoxy resin combined with compatible metallic pigments, allowing controlled movement of the material to produce variations in depth, color concentration, and reflective effect across the prepared concrete. The system can be configured for residential interiors, showrooms, offices, reception areas, retail spaces, and other locations where a distinctive finished floor is required.
Concrete preparation begins with diamond grinding to remove laitance, contaminants, weak surface material, and incompatible existing coatings. Cracks, pinholes, spalled areas, and surface imperfections are repaired before primer or base-coat application because metallic finishes can make substrate defects more visible under direct lighting. The prepared surface is then cleaned thoroughly and checked for the required profile, moisture condition, and environmental suitability before resin application begins.
The metallic coating is applied within controlled working times because pigment movement changes as the epoxy begins to cure. Application tools and techniques are selected according to the desired pattern, including squeegee distribution, roller application, back-rolling, and controlled manipulation of the metallic layer. This process creates a continuous resin surface while allowing the finished pattern to remain distinct rather than appearing like a standard solid-color coating.
Our metallic systems use specially formulated pigments designed to remain suspended and visually active within the epoxy resin during application. Pigment concentration, mixing method, base color, application thickness, and manipulation technique all influence the final visual pattern and must be controlled throughout the installation. Different pigment combinations can produce subtle movement, contrasting veins, clouded effects, or deeper visual variation while maintaining a continuous coating surface.
The base coat is selected to establish the underlying color and provide a consistent foundation for the metallic layer. Metallic pigment is then incorporated into the epoxy according to the manufacturer's specified ratio and working time, with application techniques adjusted to achieve the intended visual distribution. A clear polyurethane or polyaspartic topcoat can be added to protect the decorative layer from abrasion, staining, UV exposure, and routine cleaning.
Lighting conditions are considered because metallic finishes can reflect overhead fixtures, windows, and directional lighting differently throughout the room. Surface preparation and application consistency are therefore critical in areas where the floor will be viewed from multiple angles. The completed finish provides visual variation without requiring separate tiles, grout joints, or mechanically joined decorative flooring materials.
We select protective topcoats according to traffic levels, expected cleaning, UV exposure, and the desired level of gloss or surface appearance. Polyurethane or polyaspartic clear coats can provide additional abrasion resistance and chemical protection over the metallic epoxy layer while helping preserve the decorative finish. The topcoat also creates a sacrificial wear layer that can be maintained or renewed independently of the underlying decorative system when appropriate.
The seamless resin construction eliminates traditional grout lines and reduces porous concrete exposure throughout the coated area. Properly cured epoxy provides resistance to routine foot traffic, staining, impact, and common household or commercial contaminants, while the protective topcoat adds another level of surface protection. Performance still depends on substrate preparation, coating thickness, environmental conditions, maintenance practices, and the specific resin products selected.
Curing is carefully controlled because metallic epoxy can be damaged by premature foot traffic, moisture, dust, or contact with equipment while the resin is still developing its final properties. The floor remains protected during curing until the coating manufacturer permits the appropriate level of use. Final inspection includes checking pigment distribution, surface continuity, edge detailing, gloss consistency, and visible application defects before the floor is released for service.
The effect is produced by combining metallic pigments with a two-component epoxy resin and manipulating the wet coating during its working period. Pigment movement is influenced by application technique, resin viscosity, base color, coating thickness, and the timing of the installation process. Because these factors affect the final appearance, each metallic floor develops its own controlled pattern rather than a completely uniform surface.
Yes, compatible metallic pigments can be combined to create contrasting or coordinated color effects within the resin system. Base colors and metallic tones are selected according to the intended appearance, while pigment concentration and application technique determine how strongly each color appears. The selected combinations must remain chemically compatible with the epoxy and protective topcoat.
A clear topcoat is commonly recommended when the floor requires additional protection from abrasion, staining, UV exposure, and frequent cleaning. Polyurethane and polyaspartic products can be selected according to the project's traffic and exposure requirements. The protective layer also helps preserve the metallic finish by providing an additional wear surface above the decorative epoxy.
Yes, existing concrete can receive metallic epoxy when it provides a stable substrate and is properly prepared. Diamond grinding or another approved mechanical preparation method removes weak material, contaminants, and incompatible coatings while establishing the required bonding profile. Moisture conditions, cracking, oil contamination, and substrate deterioration should be evaluated before installation.
Metallic epoxy can be used in commercial areas when the complete coating assembly is specified for the expected traffic and protected with an appropriate topcoat. High-build epoxy provides the decorative body layer while polyurethane or polyaspartic protection can improve abrasion and chemical resistance. Areas exposed to extreme mechanical loading may require a different industrial coating configuration better suited to those conditions.
© 2026 All Rights Reserved | Richmond Hill Epoxy Flooring