Industrial floors face mechanical loads, equipment movement, concentrated impact, chemical exposure, and continuous traffic that can quickly damage untreated concrete and inadequately specified coatings. With 20 years of specialized experience, Richmond Hill Epoxy Flooring installs heavy-duty industrial epoxy systems using high-build 100% solids epoxy, quartz aggregates, reinforced broadcast systems, chemical-resistant formulations, and compatible polyaspartic protective topcoats. Our licensed technicians apply specialized substrate preparation and multi-layer installation techniques for warehouses, manufacturing areas, mechanical facilities, workshops, storage operations, loading zones, and other industrial environments in Richmond Hill.
Industrial epoxy services include high-build coating installation, reinforced broadcast flooring, quartz-filled systems, chemical-resistant surfaces, anti-slip treatments, equipment-area coatings, concrete resurfacing, and industrial floor restoration. Depending on the operating environment, industrial systems can be specified at approximately 60–100+ mils of total dry film thickness, with thicker aggregate-rich assemblies used where greater impact resistance, abrasion protection, or traction is required. Quartz or aluminum oxide aggregates can be incorporated into selected systems to improve surface texture, while chemical-resistant resin formulations and protective topcoats provide additional defense against oils, cleaning agents, solvents, and other substances encountered during industrial operations.
Before coating application, technicians evaluate concrete integrity, surface profile, contamination, cracking, spalling, previous coatings, and moisture transmission. Diamond grinding or shot blasting removes weak material and establishes the specified concrete profile, while compatible repair compounds address cracks and damaged sections before primer, high-build epoxy, aggregate broadcasts, and protective topcoats are installed at controlled thicknesses. Relative humidity, substrate temperature, dew point, recoat windows, and curing intervals are monitored because environmental conditions directly influence epoxy adhesion, intercoat bonding, and final coating performance.
Industrial repair services address delamination, impact damage, worn equipment pathways, coating breakdown, chemical staining, cracking, and areas exposed to concentrated mechanical loads. Unsound coating and damaged substrate material are removed from affected sections before technicians correct underlying deficiencies and rebuild the specified coating assembly with compatible materials, preserving serviceable flooring where complete removal is not technically necessary.
Most industrial epoxy flooring projects require approximately 7–14 business days, depending on facility size, substrate condition, repair requirements, coating thickness, aggregate installation, environmental conditions, and curing intervals. Once fully cured according to the selected system specifications, the completed flooring provides a dense, seamless protective surface engineered for heavy traffic, equipment movement, abrasion, moisture, chemical exposure, and demanding industrial operations.
Get a FREE Quote

Motorcycle and ATV repairs had soaked oil, coolant and brake fluid into the 1,100 sq ft service bay of this powersports shop, and the cracked slab was getting slippery around the lifts. The crew shot blasted and ground the concrete, cut out and filled the worst cracks, then installed a 100% solids grey epoxy system with an anti-slip aggregate in the work zones. A chemical-resistant urethane topcoat finished the floor. Technicians now wipe up spills in seconds and move bikes across a floor that grips under wet boots.
Turnaround time: 3 days
Final price: $8,600 CAD

Industrial epoxy floor coating provides a high-build resin surface for concrete floors exposed to forklift traffic, pallet movement, machinery, abrasion, impact, and industrial cleaning processes. We use planetary diamond grinders, industrial HEPA dust extractors, concrete moisture meters, variable-speed resin mixers, gauge rakes, notched squeegees, and industrial rollers to prepare and coat the substrate according to the required flooring specification. Mechanical grinding removes laitance, weak concrete, embedded contaminants, and incompatible coatings while establishing a suitable surface profile for epoxy adhesion.
The flooring assembly can incorporate an epoxy primer, high-solids epoxy body coat, broadcast aggregate, and polyurethane or polyaspartic protective topcoat. Two-component epoxy materials are measured according to manufacturer-defined ratios and mechanically mixed at controlled speeds to produce consistent resin and hardener distribution without excessive air incorporation. Gauge rakes and squeegees regulate material placement while back-rolling distributes the resin evenly and maintains the specified film thickness across the industrial floor.
Concrete moisture, substrate temperature, ambient temperature, and relative humidity are verified before installation because excessive moisture or unsuitable curing conditions can compromise coating performance. Cracks, spalls, joints, and surface voids are treated with compatible epoxy repair compounds where required before the coating layers are installed. The resulting industrial epoxy surface provides a seamless protective barrier with resistance to abrasion, impact, staining, moisture exposure, and selected industrial chemicals.

Industrial quartz epoxy flooring combines high-performance epoxy resin with graded quartz aggregate to create a reinforced surface capable of handling demanding traffic and mechanical wear. Equipment includes planetary diamond grinders, HEPA-filtered dust extraction, industrial vacuum systems, moisture meters, calibrated mixing drills, gauge rakes, squeegees, and aggregate broadcast equipment. The concrete is mechanically profiled before the resin layers are placed, allowing the quartz aggregate to become mechanically integrated into the epoxy system.
Quartz aggregate is distributed into wet epoxy at a controlled broadcast rate selected according to the required surface density and texture. Different aggregate gradations can be incorporated to produce a smoother or more heavily textured finish, while the resin thickness determines the level of encapsulation and structural coverage around the mineral aggregate. A compatible polyurethane or polyaspartic seal coat can be installed over the cured quartz layer to improve resistance to abrasion, staining, moisture, and chemical exposure.
The surface profile is established according to the expected operating conditions, particularly in areas where equipment, industrial footwear, or wet processes require additional traction. Excess aggregate is removed after the resin reaches the appropriate cure stage, and exposed or irregular sections are corrected before the final protective coat is applied. The completed quartz epoxy assembly provides a dense, textured industrial floor engineered for heavy traffic, mechanical wear, repeated cleaning, and controlled chemical exposure.

Industrial metallic epoxy flooring combines pigmented epoxy resin with controlled metallic effects to produce a seamless decorative surface for industrial interiors where appearance and resin performance must coexist. Installation equipment includes variable-speed mixers, calibrated resin containers, flat squeegees, rollers, spike shoes, and specialized pigment manipulation tools for controlled distribution across prepared concrete. Diamond grinding and HEPA vacuum extraction remove surface contaminants and establish the required mechanical profile before the metallic resin layer is applied.
Metallic pigments are dispersed into the epoxy resin according to the specified formulation and applied at a controlled thickness across the prepared floor. Squeegee direction, roller movement, and specialized manipulation techniques influence pigment flow and create dimensional patterns without relying on separate decorative panels or seams. A clear polyurethane or polyaspartic topcoat can be applied after curing to protect the metallic epoxy from abrasion, staining, chemical contact, and routine industrial cleaning.
Application sections are coordinated according to the epoxy's pot life to maintain consistent color movement and prevent visible cold joints between work areas. Substrate temperature, resin temperature, ambient humidity, and recoat intervals are monitored throughout installation to maintain proper curing and intercoat adhesion. The finished metallic epoxy floor provides a continuous resin surface with controlled visual variation and protective properties suitable for selected industrial facilities, showrooms, production-adjacent spaces, and equipment areas.

Industrial anti-slip epoxy flooring uses textured aggregate integrated into the resin coating to increase traction on concrete surfaces exposed to moisture, oils, process fluids, and industrial footwear. Preparation requires diamond-grinding equipment, HEPA dust extraction, moisture meters, industrial vacuum systems, calibrated resin mixers, notched squeegees, rollers, and aggregate broadcast tools. The concrete is mechanically profiled and cleaned before the epoxy base layer receives the specified anti-slip aggregate.
Aluminum oxide, silica-based aggregate, quartz, or other compatible mineral particles can be incorporated according to the required texture and flooring specification. Aggregate size and broadcast density determine the resulting surface profile, while the epoxy resin encapsulates the particles and bonds them to the concrete substrate. A compatible seal coat can be applied to lock the aggregate into the system while maintaining the required texture and providing additional resistance to abrasion, staining, moisture, and chemical exposure.
The slip-resistant profile is selected according to the floor's operating environment rather than applying the same aggregate configuration to every industrial area. Wet-process zones, maintenance areas, loading spaces, and equipment rooms can require different levels of surface texture based on expected contaminants and cleaning procedures. The completed anti-slip epoxy system provides a mechanically bonded, textured floor surface designed to improve traction while maintaining the durability and cleanability required for demanding industrial applications.
We begin industrial epoxy flooring projects in Richmond Hill, ON by examining the facility's operational conditions, floor loading, equipment movement, chemical exposure, temperature changes, and cleaning procedures. The assessment considers forklift routes, pallet traffic, machinery foundations, loading areas, production zones, drainage points, and locations where concentrated impact or abrasion occurs. Concrete inspection equipment, moisture meters, laser measurement tools, surface profile gauges, and visual inspection instruments are used to establish the existing substrate condition.
The flooring specification is developed around the actual service environment rather than relying on a general-purpose coating. Heavy-duty 100% solids epoxy, quartz-reinforced epoxy, mortar systems, urethane cement, and compatible polyaspartic or polyurethane topcoats can be considered where conditions require increased mechanical, thermal, or chemical resistance. System thickness is established according to anticipated loading and exposure, with aggregate reinforcement incorporated where additional impact or wear resistance is necessary.
Industrial floor details are evaluated individually because drains, joints, equipment bases, ramps, thresholds, and transitions can experience different stresses from the main slab. Rigid resin systems are selected for stable areas, while movement-sensitive joints receive compatible joint materials and detailing procedures. This engineering-focused assessment helps establish an industrial epoxy flooring system suited to demanding operating conditions in Richmond Hill, ON.
Our substrate preparation uses industrial planetary grinders, shot-blasting equipment where appropriate, diamond tooling, and HEPA dust extraction to remove laitance, weak concrete, previous coatings, and surface contamination. Shot blasting can provide rapid mechanical profiling across large open areas, while diamond grinding allows more controlled preparation around edges, joints, columns, and equipment locations. Industrial vacuum systems collect generated dust and loose material to maintain a clean surface suitable for resin application.
Concrete defects are repaired before the heavy-duty coating is installed, with repair materials selected according to the defect type and expected loading. Structural cracks and stable non-moving defects can receive low-viscosity epoxy injection or repair compounds, while damaged joints and localized deterioration may require polyurea or high-strength cementitious repair materials. Deep depressions or damaged sections can be rebuilt using industrial-grade patching materials before the surface receives its final mechanical profile.
The prepared slab is inspected for profile consistency, bond strength considerations, contamination, and moisture conditions before resin installation begins. Pull-off testing may be performed where project requirements call for verification of the substrate or coating bond performance. This controlled preparation process reduces weak interfaces and establishes the mechanical foundation necessary for heavy-duty industrial epoxy flooring.
We install the specified industrial resin system using industrial-grade mixers, gauge rakes, notched squeegees, steel trowels, rollers, and calibrated application tools. Two-component materials are mixed in controlled batches according to the manufacturer's formulation requirements, with batch sizes coordinated to the working time of the product. High-build epoxy can be installed at a specified thickness, while epoxy mortar systems use graded aggregate to produce substantially thicker and more impact-resistant flooring assemblies.
Quartz sand, silica aggregate, aluminum oxide, or other compatible reinforcement can be incorporated according to the selected industrial system. Broadcast aggregate is applied into wet resin at a controlled rate, followed by removal of loose material and installation of additional binder or seal coats as specified. Where thermal shock, hot-water exposure, aggressive chemicals, or severe industrial cleaning is expected, urethane cement or another chemically resistant system may be specified instead of conventional epoxy.
The final protective layer is selected according to the facility's exposure profile and maintenance requirements. Polyurethane and polyaspartic coatings can be used where enhanced abrasion resistance, chemical resistance, ultraviolet stability, or faster return-to-service characteristics are required. Application thickness, aggregate loading, recoat intervals, and curing conditions are controlled throughout installation to maintain the designed performance of the industrial floor system.
Our final inspection evaluates the industrial floor for coating continuity, aggregate distribution, thickness consistency, joint treatment, surface texture, and visible defects. Critical areas such as forklift lanes, machinery surroundings, loading zones, ramps, drains, and transitions receive additional inspection because these locations experience concentrated operational stress. Defects such as pinholes, exposed substrate, delamination indicators, incomplete coverage, or uneven aggregate are corrected using compatible system materials.
Curing conditions are managed according to the technical requirements of the installed resin system. Facility temperature, concrete temperature, humidity, ventilation, coating thickness, and chemical exposure conditions are considered when determining the required restriction period for pedestrians, forklifts, pallet jacks, machinery, and other equipment. The floor is kept protected until the coating reaches the manufacturer's specified service-readiness level.
The completed surface is cleaned and reviewed against the project specifications before operational access is restored. Depending on the selected system, industrial epoxy flooring can provide resistance to heavy traffic, abrasion, impact, chemical exposure, staining, and repeated industrial cleaning. This structured installation approach provides heavy-duty floor protection for warehouses, workshops, manufacturing spaces, service facilities, and other industrial properties throughout Richmond Hill, ON.
Heavy-Duty Systems for Industrial Operating Conditions
Industrial epoxy flooring is engineered for facilities exposed to heavy foot traffic, equipment movement, material handling, impact, abrasion, and demanding maintenance conditions. We use multi-layer epoxy systems selected according to load requirements, traffic patterns, chemical exposure, and concrete substrate conditions rather than applying a standard residential coating assembly. Depending on the application, the system can include moisture-tolerant primer, high-build epoxy, aggregate reinforcement, decorative or solid-color body coats, and chemical-resistant polyurethane or polyaspartic topcoats.
Industrial concrete preparation requires mechanical methods capable of removing laitance, weak concrete, old coatings, embedded contaminants, and surface irregularities. Diamond grinding and shot blasting can be selected according to the existing slab and required surface profile, while cracks, spalls, joint edges, and deteriorated concrete are repaired before coating installation. Moisture evaluation is also important for industrial slabs because vapor transmission, hydrostatic conditions, or unsuitable substrate moisture can compromise coating adhesion.
The flooring specification is established around the facility's operating conditions, including forklift traffic, pallet movement, machinery vibration, wheeled carts, impact exposure, and cleaning procedures. High-build systems can provide greater film thickness than standard decorative epoxy applications, while aggregate-filled systems can increase surface texture and improve wear characteristics. This approach allows the finished floor to function as a protective surface rather than simply serving as a decorative concrete coating.
Our industrial flooring systems can incorporate high-build epoxy formulations with aggregate reinforcement where the floor is exposed to substantial abrasion or mechanical wear. Quartz aggregate, aluminum oxide, or other compatible mineral materials can be incorporated according to the specified system to increase surface texture and provide additional wear characteristics. A chemically resistant topcoat can be selected when the facility regularly handles oils, solvents, cleaning compounds, or other substances that may affect conventional coatings.
Forklift lanes, loading areas, equipment zones, and maintenance areas can receive flooring specifications based on their individual exposure levels. Heavier traffic areas may require increased coating thickness, additional aggregate, or a more robust topcoat rather than receiving the same configuration used in low-traffic sections. Joints and transitions are also treated according to movement and structural requirements so the rigid coating does not unnecessarily bridge areas designed to accommodate concrete movement.
The completed system provides a continuous protective layer over the concrete while supporting routine industrial cleaning and maintenance. Chemical and abrasion resistance depends on the specific resin chemistry, film thickness, exposure concentration, contact duration, and operating temperature, so these factors are considered when selecting materials. This performance-based specification helps prevent premature coating deterioration in facilities where floor failure can affect workflow, safety, equipment movement, and maintenance operations.
We establish the installation sequence around active industrial conditions, access restrictions, equipment locations, drainage points, floor penetrations, and required operational shutdown periods. Mixing and application equipment is selected to maintain accurate material ratios and consistent coverage across large floor sections, while controlled installation zones help maintain proper environmental conditions. Coating layers are installed within their specified recoat windows to promote intercoat adhesion and consistent curing.
Industrial floors often contain joints, equipment anchors, trenches, drains, ramps, and transitions that require detailed preparation before coating. These areas are mechanically prepared and repaired where necessary, with joints treated according to their intended movement rather than being indiscriminately sealed beneath a rigid coating. Drainage slopes and floor penetrations are maintained during application so the finished system does not obstruct existing facility functions.
Quality checks are performed throughout the installation to identify inconsistent coverage, contamination, aggregate distribution issues, edge defects, or surface irregularities before the system is released for service. Curing periods are established according to the coating chemistry and environmental conditions, with heavy equipment and industrial traffic restricted until the required cure level is achieved. The completed industrial epoxy flooring is therefore installed as a coordinated system designed around the facility's actual operating demands.
Yes, an appropriately specified industrial epoxy flooring system can be designed for forklift and other wheeled-equipment traffic. The required coating thickness, resin formulation, substrate strength, and aggregate configuration depend on axle loads, traffic frequency, turning patterns, and impact exposure. Areas with concentrated forklift movement should receive a flooring specification designed specifically for those loads rather than a standard decorative epoxy system.
Industrial facilities may require multi-layer high-build epoxy systems that combine primers, body coats, aggregate reinforcement, and protective topcoats. The exact resin chemistry and layer configuration depend on chemical exposure, mechanical loading, abrasion, moisture conditions, and required service characteristics. A site assessment is necessary to determine whether the facility requires standard high-build epoxy, aggregate-filled systems, or a chemically resistant multi-layer assembly.
Certain epoxy and polyurethane formulations provide resistance to specific chemicals, but performance depends on the chemical type, concentration, temperature, and duration of contact. The flooring specification should therefore be matched to the substances used or stored within the facility rather than assuming that every epoxy product provides universal chemical resistance. Where exposure is significant, a chemically resistant topcoat or specialized resin system may be incorporated into the flooring assembly.
Heavy industrial concrete is commonly prepared through diamond grinding or shot blasting to remove weak material, contamination, previous coatings, and surface irregularities. Severely deteriorated areas may require concrete repair, crack treatment, or localized reconstruction before the coating process begins. The final preparation must establish the surface profile and cleanliness required by the selected industrial epoxy system.
Installation can sometimes be divided into controlled work zones so portions of the facility remain accessible while other areas receive preparation and coating. The feasibility depends on floor layout, equipment movement, ventilation, curing requirements, safety controls, and the amount of space required for material handling. A phased installation schedule can be developed when the facility cannot accommodate a complete operational shutdown.
© 2026 All Rights Reserved | Richmond Hill Epoxy Flooring