Commercial flooring must tolerate sustained traffic, equipment movement, spills, cleaning chemicals, and frequent maintenance without compromising the underlying concrete. With 20 years of specialized experience, Richmond Hill Epoxy Flooring provides commercial epoxy floor coating using 100% solids epoxy, high-build resin systems, quartz aggregates, decorative vinyl flakes, and polyaspartic topcoats selected according to the facility’s operating conditions. Our licensed technicians have specialized skills in concrete preparation, moisture evaluation, crack repair, coating application, and multi-layer system installation for retail facilities, showrooms, offices, workshops, service areas, and other commercial properties in Richmond Hill.
Commercial coating options include new epoxy applications, concrete resurfacing, decorative flake systems, quartz broadcast flooring, high-build protective coatings, recoating, and localized restoration. Standard commercial systems can be specified at approximately 30–60 mils of total dry film thickness, while areas exposed to heavier traffic, equipment, or impact may require 60–100+ mil assemblies based on engineering and manufacturer requirements. Slip-resistant aggregates, chemical-resistant epoxy formulations, and UV-resistant polyaspartic topcoats can be incorporated when the facility requires additional traction, chemical protection, or improved color stability.
Each project starts with an assessment of concrete condition, surface profile, contamination, previous coatings, cracking, spalling, and moisture transmission that could affect adhesion. Our technicians use diamond grinding or shot blasting to remove weak concrete and contaminants, establish the required surface profile, repair substrate defects, and install the specified primer, epoxy body coat, aggregate broadcast, and protective topcoat at controlled thicknesses. Substrate temperature, relative humidity, dew point, recoat windows, and curing intervals are monitored throughout the application to reduce risks associated with improper bonding, bubbling, delamination, and premature coating failure.
Commercial repair work addresses worn traffic lanes, chipped coating, localized peeling, impact damage, surface cracking, staining, and isolated delamination. Where the surrounding system and concrete remain suitable, technicians can mechanically prepare the affected section, correct the substrate deficiency, and apply compatible repair coatings without unnecessarily removing the entire floor.
Most commercial epoxy coating projects require approximately 5–10 business days, depending on floor area, concrete preparation, repair requirements, coating thickness, number of layers, environmental conditions, and curing intervals. After the specified cure period, the finished system provides a seamless, low-maintenance surface designed to withstand commercial foot traffic, equipment movement, routine cleaning, moisture, abrasion, and everyday operational demands.
Get a FREE Quote

A classic car detailing studio off Highway 7 had a stained, cracked 1,600 sq ft slab that looked nothing like the restored muscle cars parked on it. The crew diamond ground the concrete, filled every crack and applied a moisture-tolerant primer, then poured a deep blue metallic epoxy that gives the floor a polished, marbled depth. A clear urethane topcoat added scratch and chemical resistance. Clients now walk into a showroom-style space where every car reflects off the floor.
Turnaround time: 3 days
Final price: $12,800 CAD

Our Commercial Epoxy Floor Coating systems are engineered for offices, commercial buildings, service facilities, and other concrete floors exposed to sustained pedestrian and equipment traffic. The system uses high-build epoxy resin and hardener formulated for strong concrete adhesion, abrasion resistance, impact resistance, and protection against oils and common commercial chemicals. Concrete preparation uses industrial diamond grinders with progressively sized diamond tooling to remove laitance, weak concrete, surface contaminants, and existing coating residue while creating the required mechanical profile for epoxy adhesion.
Application begins with an epoxy-compatible concrete primer followed by a measured high-build epoxy coat applied at the specified film thickness for the intended traffic conditions. Cracks and non-moving defects receive compatible epoxy repair materials before coating, while control and expansion joints are properly treated according to their movement requirements. Where increased chemical resistance, abrasion protection, or UV stability is required, a polyaspartic or polyurethane topcoat is applied over the cured epoxy system.
The installation process includes moisture testing, mechanical surface profiling, industrial vacuum extraction, crack repair, primer application, epoxy coating placement, and protective topcoat installation. Specialized squeegees, gauge rakes, rollers, and spike shoes are used according to the coating system and application stage to maintain consistent material distribution and film thickness. The completed seamless epoxy surface provides a dense, low-maintenance finish that protects the concrete substrate from commercial traffic and routine wear.

Our Commercial Epoxy Floor Coating for warehouses and distribution facilities is designed for concrete floors exposed to forklifts, pallet jacks, carts, storage equipment, and repeated impact from material handling operations. High-build epoxy formulations create a hard, bonded surface with resistance to abrasion, impact, oil contamination, and routine chemical exposure associated with warehouse environments. Industrial diamond grinding or shot blasting removes weak concrete, laitance, contaminants, and deteriorated coatings while producing the concrete surface profile required for mechanical epoxy bonding.
Quartz broadcast systems can be incorporated where increased surface texture and traction are required for high-traffic warehouse areas. Graded quartz aggregate is distributed into the wet epoxy layer to create a reinforced wearing surface, followed by scraping, vacuum removal of excess aggregate, and application of a compatible epoxy or polyaspartic topcoat. Polyaspartic topcoats provide additional abrasion and chemical resistance while allowing the flooring system to achieve a durable sealed finish.
Before installation, the concrete slab is inspected for cracks, joints, surface deterioration, moisture conditions, and areas requiring epoxy-compatible repair. Industrial HEPA-filtered vacuums remove grinding dust and loose particles so the prepared substrate remains clean before primer and coating application. The completed epoxy flooring system provides a seamless, abrasion-resistant surface engineered for warehouse traffic and continuous material handling.

Our Commercial Epoxy Floor Coating for retail stores and showrooms provides a seamless concrete coating system designed to withstand concentrated pedestrian traffic while maintaining a uniform decorative finish. The flooring system can incorporate solid-color epoxy, decorative vinyl flakes, quartz aggregate, or metallic epoxy depending on the required appearance and performance characteristics. Mechanical diamond grinding prepares the concrete substrate, while industrial vacuum extraction removes fine dust that could interfere with epoxy adhesion.
Decorative vinyl flakes can be broadcast into the wet epoxy layer at controlled coverage rates to create consistent texture and visual distribution across the floor. Quartz aggregate can provide additional surface texture, while metallic epoxy pigments can produce a specialized decorative finish when the substrate and operating conditions are suitable. A clear polyaspartic topcoat seals the decorative layer and adds abrasion resistance, stain resistance, and protection against routine cleaning chemicals.
Installation includes concrete profiling, crack and surface repair, epoxy primer application, base-coat installation, decorative aggregate or pigment placement, scraping where required, and protective topcoat application. Gauge rakes, notched squeegees, spike rollers, and professional coating rollers are selected according to the viscosity and thickness of each epoxy layer. The finished commercial epoxy floor provides a continuous, cleanable surface with controlled texture and long-term protection against pedestrian wear.

Our Commercial Epoxy Floor Coating for restaurants and commercial kitchens is formulated for concrete floors exposed to moisture, grease, food-related spills, cleaning chemicals, and intensive foot traffic. High-build epoxy creates a dense, seamless coating that bonds to properly prepared concrete and helps protect the substrate from routine liquid and chemical exposure. Diamond grinding equipment, industrial dust extraction, and mechanical surface preparation are used to remove contaminants and establish the concrete profile required for reliable coating adhesion.
Quartz broadcast aggregate can be embedded into the epoxy layer when additional traction and surface texture are required for kitchen and service areas. The aggregate is distributed across the wet resin at a controlled rate, followed by removal of loose particles and installation of a compatible sealing layer. Polyaspartic or chemical-resistant polyurethane topcoats can be applied where increased resistance to cleaning agents, grease, abrasion, and repeated commercial use is required.
The flooring system is installed through concrete inspection, moisture testing, mechanical grinding, crack repair, industrial vacuum cleaning, epoxy primer application, base-coat installation, aggregate broadcast, and protective topcoat application. Squeegees, gauge rakes, rollers, spike rollers, and mechanical mixing equipment are selected according to the specified epoxy formulation and installation requirements. The completed epoxy flooring provides a seamless, textured, and chemically resistant surface suitable for demanding restaurant and commercial kitchen environments.
We begin commercial epoxy floor coating projects in Richmond Hill, ON by evaluating the facility's floor conditions, traffic patterns, operating environment, and maintenance requirements. Concrete surfaces are inspected for cracking, laitance, oil contamination, previous coatings, moisture migration, and areas exposed to repeated cart, pallet, or equipment movement. Laser levels, moisture meters, concrete surface profile tools, measuring equipment, and inspection lights help establish the substrate condition and determine the appropriate coating thickness and system configuration.
The coating specification is selected according to the property's operational demands rather than applying a standard residential-grade system. High-solids epoxy, 100% solids epoxy, quartz-filled epoxy, vinyl flake systems, and compatible polyurethane or polyaspartic topcoats can be specified for offices, retail spaces, showrooms, service areas, warehouses, and other commercial environments. Material quantities are calculated from measured floor dimensions, substrate porosity, specified coverage rates, and required dry film thickness to maintain consistent performance throughout the installation.
Special attention is given to entrances, work zones, equipment paths, corners, floor drains, expansion joints, and other areas subjected to concentrated wear. Joint details are treated using compatible flexible or rigid materials according to movement requirements, while damaged concrete is repaired before the coating system is installed. This planning stage establishes the performance requirements for a commercial epoxy floor coating that can withstand the specific conditions found throughout Richmond Hill, ON.
Our preparation process uses mechanical abrasion rather than depending solely on chemical etching to establish a suitable bonding profile for the commercial epoxy system. Planetary floor grinders equipped with industrial diamond tooling remove laitance, weak concrete, previous coating residues, and surface irregularities while HEPA dust extractors collect airborne particles during grinding. Heavily contaminated areas receive targeted treatment with commercial degreasers and mechanical scrubbing before final vacuuming.
Cracks, spalls, control joints, and damaged sections are repaired using application-specific materials selected according to movement and loading conditions. Low-viscosity epoxy fillers can be used for stable cracks, while polyurea repair compounds are suitable for rapid repairs where reduced downtime is important. Concrete patching compounds are used to rebuild localized deteriorated sections and create a sound surface before the coating layers are applied.
After mechanical preparation and repairs, the substrate is checked for consistent surface profile, cleanliness, and moisture conditions. Industrial vacuums, stiff-bristle brushes, scrapers, crack-repair equipment, and moisture testing instruments are used to remove remaining contaminants and verify readiness. A properly prepared substrate allows the commercial epoxy coating to form a stronger bond and reduces the risk of delamination under regular business operations.
We install the selected commercial epoxy system using calibrated squeegees, gauge rakes, solvent-resistant rollers, and professional mixing equipment. Two-component resin and hardener are combined at the manufacturer's specified ratio using low-speed mechanical mixers to achieve uniform dispersion while limiting unnecessary air introduction. Depending on the intended use, the system can be applied as a medium-build or high-build coating with the specified film thickness controlled through material quantity and application tools.
Areas requiring increased mechanical or chemical resistance can receive quartz aggregate, aluminum oxide, or other compatible reinforcement within the epoxy system. Broadcast aggregate is distributed into the wet resin at a controlled rate before the excess material is removed and the surface is recoated. This method can increase surface texture, improve traction, and provide additional wear resistance in commercial areas subject to frequent movement or contamination.
The final coating configuration is determined by the required service conditions, including pedestrian traffic, wheeled equipment, cleaning procedures, chemical exposure, and impact risk. Compatible urethane or polyaspartic topcoats can be installed where additional abrasion resistance, stain resistance, or ultraviolet stability is required. Each layer follows the manufacturer's specified recoat window, temperature range, and curing requirements before the next material is applied.
Our completion procedure includes a systematic inspection of the coated floor for uniform thickness, edge coverage, texture, joint treatment, decorative consistency, and surface defects. Inspection lighting is used to identify pinholes, fisheyes, bubbles, roller marks, uneven aggregate distribution, and other imperfections that may not be visible under normal facility lighting. Areas requiring correction are repaired using compatible materials and blended into the surrounding coating system.
The completed floor remains protected during the specified curing period so the epoxy can achieve its intended hardness and resistance characteristics. Temperature and humidity conditions are monitored because excessive moisture, low temperatures, or inadequate ventilation can affect curing and final coating performance. Traffic restrictions remain in place until the coating manufacturer’s requirements for pedestrian use, equipment movement, and full service exposure have been satisfied.
The finished commercial epoxy floor is then cleaned and reviewed against the project specifications before the space is returned to normal operation. The completed system can provide a seamless, low-maintenance surface with resistance to abrasion, stains, impact, cleaning chemicals, and routine commercial traffic. This controlled process delivers commercial epoxy floor coating in Richmond Hill, ON configured for the operational requirements of each facility.
High-Traffic Coating Systems for Commercial Properties
Commercial epoxy floor coating is specified for Richmond Hill properties that require a durable, seamless surface capable of handling frequent pedestrian traffic, rolling equipment, deliveries, and routine cleaning. We use two-component high-build epoxy systems with controlled resin-to-hardener ratios, applied over mechanically prepared concrete to establish dependable substrate adhesion. Depending on the facility's operating conditions, the system can include an epoxy primer, high-build body coat, decorative aggregate or vinyl flakes, and a polyurethane or polyaspartic protective topcoat.
Concrete preparation includes diamond grinding or shot blasting to remove laitance, existing weak coatings, contaminants, and surface irregularities before the coating system is installed. Cracks, spalls, control joints, and damaged concrete are repaired with compatible materials before priming, while moisture conditions are evaluated to identify potential vapor-related adhesion problems. The prepared substrate is maintained within the coating manufacturer's specified surface profile, temperature, and moisture requirements to support proper bonding and curing.
Commercial floors can be configured according to the facility's traffic and maintenance requirements rather than using a standard coating assembly. Smooth epoxy systems provide easy cleaning for offices, showrooms, retail areas, and service spaces, while broadcast aggregate systems can provide increased texture and slip resistance for areas exposed to water, oils, or frequent foot traffic. Coating thickness, aggregate size, broadcast density, and topcoat selection are established according to the property's expected wear, chemical exposure, and cleaning procedures.
Our commercial epoxy flooring systems are formulated to withstand repeated exposure to common commercial contaminants, including oils, grease, cleaning chemicals, and dirt. High-build epoxy provides a dense cured surface that resists routine abrasion and impact while polyurethane or polyaspartic topcoats can provide additional resistance to UV exposure, chemicals, and surface wear. Material selection is based on the actual operating environment so the coating system provides appropriate performance without unnecessary components.
For commercial kitchens, service areas, workshops, storage rooms, and similar spaces, aggregate can be incorporated into the coating system to increase surface texture. Aluminum oxide or compatible mineral aggregate can be specified where additional traction is required, with broadcast rates adjusted according to the desired slip-resistant profile and cleaning requirements. Clear protective topcoats encapsulate the decorative or traction aggregate and provide an additional wear layer over the epoxy base.
The seamless construction also limits exposed joints and porous concrete areas where contaminants can accumulate. Properly installed commercial epoxy floor coating creates a continuous finished surface that supports routine sweeping, mopping, and mechanical cleaning without the maintenance requirements associated with unfinished concrete. This configuration is particularly useful for businesses that need a professional appearance while maintaining practical floor durability under daily operations.
We use calibrated mixing, controlled material distribution, and systematic application procedures to maintain consistent coating coverage throughout large commercial floor areas. Squeegees, rollers, notched tools, and appropriate mixing equipment are selected according to the coating manufacturer's application requirements and the specified film thickness. Each layer is allowed to reach the required cure condition before subsequent coats are installed, reducing the risk of intercoat adhesion problems and surface defects.
Large commercial floors require careful sequencing around doors, equipment, work zones, columns, drains, and access routes to maintain a controlled installation environment. Expansion joints and construction joints are treated according to their function rather than simply coating over them, while perimeter edges and vertical transitions receive detailed preparation and application. Work zones are coordinated to minimize unnecessary disruption while preserving the curing conditions required for the flooring system.
After application, the surface is inspected for coverage consistency, visible defects, edge detailing, aggregate distribution, and coating continuity. Areas that do not meet the specified finish or coverage requirements are corrected before the floor is released for use. This installation method provides a commercial epoxy floor coating with controlled thickness, reliable adhesion, and a finished surface appropriate for the property's operational requirements.
Yes, properly specified commercial epoxy flooring can withstand regular pedestrian traffic when the substrate is correctly prepared and the coating thickness matches the property's usage. High-build epoxy and compatible protective topcoats provide resistance to routine abrasion, impact, staining, and cleaning activity. Areas exposed to unusually heavy traffic may require a thicker system or additional wear layer based on the facility's operating conditions.
Concrete preparation commonly involves diamond grinding or shot blasting to remove contaminants, weak surface material, old coatings, and laitance. Cracks, spalled areas, and surface defects are repaired before the primer or base coat is installed, while moisture conditions are evaluated to identify potential adhesion risks. The final preparation method is selected according to the existing slab condition and the coating manufacturer's required surface profile.
Yes, slip resistance can be incorporated by broadcasting compatible mineral or aluminum oxide aggregate into the epoxy coating before applying the protective topcoat. Aggregate size and broadcast density can be adjusted to provide the required texture without creating unnecessary cleaning difficulties. This option is useful for commercial areas where water, oils, or frequent cleaning can increase the risk of slippery conditions.
Coating thickness depends on traffic, substrate condition, impact exposure, chemical contact, and the expected service environment. A light-duty commercial system may use a thinner coating assembly, while high-traffic or demanding areas may require a high-build or multi-layer system with a substantially greater total film thickness. The final specification should be based on the manufacturer's system requirements and the property's actual operating conditions.
Yes, existing floor drains can remain part of the finished flooring system when they are structurally sound and properly prepared. The coating is detailed around drain edges while maintaining drainage paths and avoiding excessive material buildup that could interfere with water flow. Drain condition, surrounding concrete, and existing slopes should be evaluated before installation so the coating work does not compromise drainage performance.
© 2026 All Rights Reserved | Richmond Hill Epoxy Flooring